To be more specific, let’s review how to find the correct Center of Gravity (CG) for your aircraft. In addition, we can look at a few balancing techniques, and how you can adjust the CG without adding additional weight.
Over the years, I’ve seen a few airplanes almost crash on takeoff because they weren’t balanced properly. Ensuring that your airplane has the proper CG location plays a major role in the longitudinal stability of your aircraft. If your aircraft is tail heavy, it will be more unstable and can stall at a low flight speed. It won’t be as predictable in pitch response and can become difficult to fly. On the other hand, a nose-heavy aircraft will lose altitude once the throttle is reduced and require a higher flight speed during the landing approach than if it were properly balanced.
HERE’S HOW TO DO IT:
1. Find the Mean Aerodynamic chord (MAC) for the wing. You can draw an accurate scale wing panel with a CAD program or simply trace out the wing on some graph paper. Measure the root and tip chord lengths and then transfer these measurements.
Extend lines from the leading edge and trailing edge of the root chord by the chord length of from the tip. Then, extend the leading and trailing edges of the wingtip, with the length of root chord length. It’s important to extend the wing panel outline so you can measure the root chord length at the fuselage’s centerline.
2. Now draw reference lines forming an X to connect the ends (extreme points) of the extended lines. Where they cross is the location of the wing panel’s MAC.
Esta historia es de la edición January 2022 de Model Airplane News.
Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.
Ya eres suscriptor ? Conectar
Esta historia es de la edición January 2022 de Model Airplane News.
Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.
Ya eres suscriptor? Conectar
Legend Hobby / Seagull Models - Cessna Grand Caravan 208
The Cessna Grand Caravan 208 is a legend in aviation circles. A single engine utility aircraft that punches up with capabilities that rival many twin engine aircraft in its class. Its seemingly simple configuration belies its near extreme utility.
PROPER CG LOCATION FOR AEROBATICS
If you are getting into aerobatics and are starting to perform more advanced maneuvers, it is time to discuss ways you can not only become a better pilot, but how you can also improve the flight characteristics of your airplanes.
Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1
This famous multi-mission single engine observation aircraft served from 1950-1974. From calling out target locations to providing intel/recon information, the Bird Dog was a valued asset in both the Korean War and Vietnam.
EARN YOUR WINGS
10 Tips for First-Flight Success
Old School Model Works Fifty Six
The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.
FLYING TWINS Multi-engine warbirds made easy
Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.
HOW TO BALANCE PROPELLERS
Four easy steps to increase performance and reduce vibration
PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL
I’m a sucker for shop stuff. I buy tools I will probably never use just because they are cool, or I might need to use them someday. When Glen from RC Plane Stands reached out about a review, however, I knew as soon as I browsed their website that I would be receiving something I would use a lot, maybe even daily.
SPIRIT OF RHINEBECK AWARD WINNER
A close up of Norman Malinowski’s 1/3-scale Albatros
CENTER OF GRAVITY BASICS
The secret to a plane that flies well