Change internal logic from relays to an Arduino Redo
MakerSpace|MakerSpace #03
An electronic project at a local science center was showing its age, calling for a refresh: in this case, rebuilding it almost from scratch with an Arduino instead of relays
Scott Sumner
Change internal logic from relays to an Arduino Redo

A museum exhibit called Buzzwire looks like outlines of two oversized hands giving you a high five (Figure 1). Each hand has a metal handle with a loop, and your goal is to move the loops up and down the hand without touching it. For an even bigger challenge, you can try to do both hands at once in the same or opposite directions. If either loop touches the hands, a buzzer and light come on and the handle vibrates.

The original circuitry for the hands comprised interconnecting timer relays to switch the assorted components. The design had no microcontrollers or anything smarter than a switch, which had several drawbacks – but the main one was that if the puzzle was abandoned mid-run, the light, buzzer, and vibration motor would run continuously until the handles were removed.

Physical Rebuild

While I rebuilt the control electronics, I sent the case out to be rebuilt as well. The original design was made out of plywood and had started to accumulate a lot of dings and scratches. The case rebuild was very helpful because it showed areas that needed to be reinforced. Ultimately, I had the entire front panel replaced with Delrin, a very hard plastic that will withstand wear and tear better than plywood. It also brings a fresh look for anyone that has seen it before.

The physical rebuild also incorporated larger vibration motors in the handles. The old version used pager motors, which were more heard than felt. The machine shop I worked with fabricated new handles from scratch that incorporated larger motors, making the buzz much more noticeable.

Esta historia es de la edición MakerSpace #03 de MakerSpace.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

Esta historia es de la edición MakerSpace #03 de MakerSpace.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

MÁS HISTORIAS DE MAKERSPACEVer todo
Access the Raspberry Pi's GPIO Pig Pen
MakerSpace

Access the Raspberry Pi's GPIO Pig Pen

The wiringPi library, which many Raspberry Pi fans have grown attached to over the years, is no longer under maintenance by its developer. An alternative, in the form of Pigpio, has arrived just in time

time-read
5 minutos  |
MakerSpace #03
Shell Programming in Python Snake Shell
MakerSpace

Shell Programming in Python Snake Shell

Create lightweight Raspberry Pi scripts with Xonsh, a Python shell that lets you write scripts in Python with Bash commands mixed in

time-read
4 minutos  |
MakerSpace #03
Playing old DOS games on the Raspberry Pi Retro Gamer
MakerSpace

Playing old DOS games on the Raspberry Pi Retro Gamer

Play old DOS games on the Dosbian operating system, which turns the Raspberry Pi into an 80486 PC

time-read
6 minutos  |
MakerSpace #03
Home Assistant makes the Raspberry Pi fit for the Z-Wave world Home Automaton
MakerSpace

Home Assistant makes the Raspberry Pi fit for the Z-Wave world Home Automaton

Z-Wave components, a RaZberry module, and the free Home Assistant software make the Raspberry Pi a powerful smart home control center

time-read
7 minutos  |
MakerSpace #03
Water your plants with a Raspberry Pi Watering Pi
MakerSpace

Water your plants with a Raspberry Pi Watering Pi

With a Pi Zero and a few components, you can build an inexpensive and reliable automatic watering system for your plants in next to no time

time-read
7 minutos  |
MakerSpace #03
Raspberry Pi automated fish feeder Fish Food
MakerSpace

Raspberry Pi automated fish feeder Fish Food

Whether at work or on vacation, every pet lover worries about how to take care of their little roommates in their absence. What aquarium owners need is an automatic feeder

time-read
7 minutos  |
MakerSpace #03
Integrate hardware components with pluggable systems Plugged In
MakerSpace

Integrate hardware components with pluggable systems Plugged In

Ecosystems with pluggable Raspberry Pi modules, sensors, and displays are a great choice if you don’t want to – or can’t – solder but still want to extend your hardware

time-read
6 minutos  |
MakerSpace #03
Change internal logic from relays to an Arduino Redo
MakerSpace

Change internal logic from relays to an Arduino Redo

An electronic project at a local science center was showing its age, calling for a refresh: in this case, rebuilding it almost from scratch with an Arduino instead of relays

time-read
9 minutos  |
MakerSpace #03
Get creative with the FLUX beamo laser and open source software Beam Me Up, Fluxy!
MakerSpace

Get creative with the FLUX beamo laser and open source software Beam Me Up, Fluxy!

With the FLUX beamo laser and a Raspberry Pi Board B10001, you can execute your own laser cutting projects on a wide range of materials

time-read
10+ minutos  |
MakerSpace #03
Power your Pi Pico with solar Self-Sufficient
MakerSpace

Power your Pi Pico with solar Self-Sufficient

Powering your Pi Pico with solar may not solve the current energy crisis, but it will save you from changing or recharging batteries

time-read
4 minutos  |
MakerSpace #03