Kitchen Pavilion - The Perfect Blend Of Entertaining Space And Storage Shed

The perfect blend of entertaining space and storage shed

- Travis Larson

With its exposed rough-sawn cedar framing and paneled ceiling, this is a beautiful pavilion, perfect for entertaining or just enjoying the outdoors. The shed at the rear provides more than 80 sq. ft. of storage, including 36 in. ft. of walls, so you could install 100 ft. of shelving and still, have a huge space left over for hanging up yard tools.

Materials, time and tools

Our DIY materials cost was about $5,000. We hired a contractor to pour the 30 x 32-ft. slab, which cost another $5,000. This is an advanced building project that requires a lot of attention to detail and experience with layout and complex framing. Three carpenters and occasional helpers spent eight long days on the construction, while the prepainting and staining work took one person two full days. You’ll need a complete tool arsenal, including a 1/2-in. a hammer drill, a chain saw, and scaffolding.

Start with a flat slab

You could go with a perfectly level slab; no slope. But the best slab would be level at the shed area, then slope away slightly so rainwater runs away from the building. Whether you do it yourself or hire a contractor, make sure the building area is flat. Ours wasn’t, and that cost us hours of complicated compensating. A 4-in.-thick slab will be fine, but thicken the slab under the four sets of 6x6 posts to a 4 x 4-ft. area 8 in. deep.

Prepaint and stain everything!