Crosscut SLED
Woodcraft Magazine|June - July 2023
A basic build of a crucial table saw accessory
Asa Christiana
Crosscut SLED

A miter gauge is a great tool for crosscutting on the table saw, especially if outfitted with an auxiliary fence. But wide pieces force the miter gauge off the front of the saw table, creating an unsafe situation. And long pieces tend to drag on the table, making cuts inaccurate.

For these reasons and more, most serious woodworkers make a custom crosscut sled for their saw. A sled does everything the miter gauge does, but better. With its broad base, long fence, and double runners, a sled carries workpieces of all sizes smoothly and accurately past the blade with no wobbles, as opposed to dragging them. This makes the sled the more accurate option for workpieces of all sizes, but especially larger ones. The fence also carries the offcut safely past the blade, and provides a place to clamp stop blocks. And the zero-clearance blade slot in the base and fence eliminates tearout on both the bottom and trailing edge of the workpiece.

Making a crosscut sled is not complicated. However, it does entail a couple of exacting procedures, including setting the runners and adjusting the fence, both of which are critical to successful operation of the sled. Not to worry: I’ve got great ways to tame each of these challenges. Follow along here and I’ll show you one of the easiest approaches for outfitting your particular saw with this crucial accessory. I think you’ll be amazed at how much control it provides and the smooth, accurate cuts it delivers.

Five components assembled for accuracy

この記事は Woodcraft Magazine の June - July 2023 版に掲載されています。

7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。

この記事は Woodcraft Magazine の June - July 2023 版に掲載されています。

7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。