Power your Pi Pico with solar Self-Sufficient
MakerSpace|MakerSpace #03
Powering your Pi Pico with solar may not solve the current energy crisis, but it will save you from changing or recharging batteries
Bernhard Bablok
Power your Pi Pico with solar Self-Sufficient

My idea to add solar power to a Raspberry Pi Pico started with a previous project [1] that displayed the time, temperature, and humidity on an e-paper display with a Pi Pico integrated on the back. For that project, I used a Badger 2040 [2] by Pimoroni (Figure 1).

The system wakes up once a minute, updates the sensor values and time, and then falls back into deep sleep. Figure 2 shows the power draw for the Badger 2040: seven seconds of activity at approximately 27mA of power consumption compared to 53 seconds at 6.5mA. The relatively low power consumption prompted me to consider using a solar panel to power this setup even in less favorable light conditions.

Solar Panels

Some brief research showed that small solar panels like the one shown in Figure 3 are available from the usual sources for a relatively low price. For my test, I chose a panel by Pimoroni that delivers a nominal 100mA at 3V. For a Pi Pico without anything attached, 3V works fine, and the Badger 2040 is also happy with this, so in theory this should work. Unfortunately, the available power is very rarely equivalent to the nominal output, which means that things are not quite so simple.

この記事は MakerSpace の MakerSpace #03 版に掲載されています。

7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。

この記事は MakerSpace の MakerSpace #03 版に掲載されています。

7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。

MAKERSPACEのその他の記事すべて表示
Access the Raspberry Pi's GPIO Pig Pen
MakerSpace

Access the Raspberry Pi's GPIO Pig Pen

The wiringPi library, which many Raspberry Pi fans have grown attached to over the years, is no longer under maintenance by its developer. An alternative, in the form of Pigpio, has arrived just in time

time-read
5 分  |
MakerSpace #03
Shell Programming in Python Snake Shell
MakerSpace

Shell Programming in Python Snake Shell

Create lightweight Raspberry Pi scripts with Xonsh, a Python shell that lets you write scripts in Python with Bash commands mixed in

time-read
4 分  |
MakerSpace #03
Playing old DOS games on the Raspberry Pi Retro Gamer
MakerSpace

Playing old DOS games on the Raspberry Pi Retro Gamer

Play old DOS games on the Dosbian operating system, which turns the Raspberry Pi into an 80486 PC

time-read
6 分  |
MakerSpace #03
Home Assistant makes the Raspberry Pi fit for the Z-Wave world Home Automaton
MakerSpace

Home Assistant makes the Raspberry Pi fit for the Z-Wave world Home Automaton

Z-Wave components, a RaZberry module, and the free Home Assistant software make the Raspberry Pi a powerful smart home control center

time-read
7 分  |
MakerSpace #03
Water your plants with a Raspberry Pi Watering Pi
MakerSpace

Water your plants with a Raspberry Pi Watering Pi

With a Pi Zero and a few components, you can build an inexpensive and reliable automatic watering system for your plants in next to no time

time-read
7 分  |
MakerSpace #03
Raspberry Pi automated fish feeder Fish Food
MakerSpace

Raspberry Pi automated fish feeder Fish Food

Whether at work or on vacation, every pet lover worries about how to take care of their little roommates in their absence. What aquarium owners need is an automatic feeder

time-read
7 分  |
MakerSpace #03
Integrate hardware components with pluggable systems Plugged In
MakerSpace

Integrate hardware components with pluggable systems Plugged In

Ecosystems with pluggable Raspberry Pi modules, sensors, and displays are a great choice if you don’t want to – or can’t – solder but still want to extend your hardware

time-read
6 分  |
MakerSpace #03
Change internal logic from relays to an Arduino Redo
MakerSpace

Change internal logic from relays to an Arduino Redo

An electronic project at a local science center was showing its age, calling for a refresh: in this case, rebuilding it almost from scratch with an Arduino instead of relays

time-read
9 分  |
MakerSpace #03
Get creative with the FLUX beamo laser and open source software Beam Me Up, Fluxy!
MakerSpace

Get creative with the FLUX beamo laser and open source software Beam Me Up, Fluxy!

With the FLUX beamo laser and a Raspberry Pi Board B10001, you can execute your own laser cutting projects on a wide range of materials

time-read
10+ 分  |
MakerSpace #03
Power your Pi Pico with solar Self-Sufficient
MakerSpace

Power your Pi Pico with solar Self-Sufficient

Powering your Pi Pico with solar may not solve the current energy crisis, but it will save you from changing or recharging batteries

time-read
4 分  |
MakerSpace #03