Arty Farty...
Classic Motorcycle Mechanics|May 2018

This month the old fool worries about the bike’s cosmetics! What is he like?

Steve Cooper
Arty Farty...

Well progress is being made and if it’s not necessarily by me then it’s by my mate Ian Bird, who has been cracking on at a right old pace.

The 500cc H1 engine is now housed within the confines of the 250cc KH250 chassis and if you didn’t know better you’d have to say it actually looks right. And when Ian then dropped in the H1’s air-box and carburettor rubbers, two things were really obvious. Firstly, there’s really not that much difference in terms of inches or centimetres between the 250 and 500 motors and secondly, the KH’s frame has more than enough space to house everything the 500 needs to make run happily. Ian had fabricated then tack welded the new engine plates in place prior to passing the frame onto a top notch welder who subsequently commented: “Well that’s a really neat job Ian, your welding’s certainly coming on.” Nice to know my project’s improving someone else’s practical skills then. As might be hoped the chain line is bang on and double checked using a rather rare and now expensive ARE alloy wheel with an old sprocket.

In theory that should be the hardest part done but as this is a genuine special and I’m being a bit of diva here I want the bike to look subtly different. The KH250 tail piece is obviously the correct one but I really want the earliest squarer and wider unit as used on the 72/73 bikes. A brief mug-up clearly demonstrates it’s not going to be an easy job but when you set your heart on something etc. As I’m obviously now digging myself a fair sized hole here Ian cynically goes on to suggest I run an early style three-sided rear light as well.

Denne historien er fra May 2018-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra May 2018-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA CLASSIC MOTORCYCLE MECHANICSSe alt
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021