Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics|September 2021
Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?
MARK HAYCOCK
Project Yamaha TX750 Part 12 A question of balance…

If you have ever ridden aBritish 650 or 750 paralleltwin you will know something about engine vibration. As a passenger it was even worse and I remember being unable to keep my feet on the foot-rests on occasions because the vibration was not just uncomfortable, but painful.

Another effect the vibration had was apparent on a friend’s Tiger 750 and that left a trail of loosened nuts and bolts behind it.

Maybe there was an engineering solution? Norton thought so in the mid-1960s when it introduced the Commando. The engine and rear suspension formed an assembly which was rubber mounted in the frame and this did work on mine. But the assembly needed careful setting up and could allow the engine to bounce up and down if there was a slight misfire.

A better solution would be to eliminate the vibration altogether, and that is what Yamaha explored in the early 1970s. The principle was to connect the crankshaft to eccentrically mounted weights, which would introduce an equal, but opposite vibration which would cancel everything out. The TX500 had the crankpins spaced at 180 degrees and a single weighted shaft was enough to do the job. The TX750, however, had a 360-degree crank and for that two separate weights were used.

Denne historien er fra September 2021-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra September 2021-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA CLASSIC MOTORCYCLE MECHANICSSe alt
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021