Project Triumph Daytona 1200 part 2 Key decisions!
Classic Motorcycle Mechanics|April 2020
Oh dear! A simple sort out of the mighty 1200cc Daytona has left our Andy B with a big list of things to find and sort! And where are the keys?
ANDY BOLAS
Project Triumph Daytona 1200 part 2 Key decisions!

So following on from last time we have managed to get the wheels out, then remove the tyres, discs and bearings.

The wheels actually looked like they were painted on top of the original finish, which isn’t nice at all! While removing the wheels I noticed that the rear caliper was weeping fluid so that was drained and removed for investigation later on. Things like this always crop up in even a mild restoration, don’t they...

While the wheels are getting a re-fresh I ordered new bearings and seals from the brilliant guys and girls at Wemoto. They really do seem to have something in stock for every modern classic bike – so do support them and try them. We at CMM couldn’t do much of what we do with our restorations and rebuilds without them.

So with the wheels back from the coaters we built them back up and Tony from AG Autos re-fitted the tyres for me. C J Wards (who are Niall Mackenzie’s powder coaters of choice, no less) did their usual excellent job on the wheels in satin black. These came up better than expected, considering the state they were in. Now the bike is back on its wheels we can start pulling more bits off.

Denne historien er fra April 2020-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra April 2020-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA CLASSIC MOTORCYCLE MECHANICSSe alt
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021