Sawing and welding
Classic Motorcycle Mechanics|May 2020
Allen is doing yet more sawing and welding on the motor of his Kawasaki ‘Super-Six’!
Allen Millyard
Sawing and welding

For me the nicest thing about makinga new engine is working out how tomake it in a way that it looks as factory produced and original looking as possible.

Sometimes I spend hours just looking at crankcase castings, cylinder barrels and cylinder heads trying to imagine the thought processes of the original designer all those years ago at the factory.

I find it helps me focus and see the way forward, and ultimately where to cut and adapt parts, making them fit together and look right.

I had already finished the crankcases and barrels, and the next job was to modify the cylinder heads to fit. I had a rough idea how I was going to cut the two heads and how to weld them back together, but the final details were still a bit fuzzy. I never let that bother me too much, though.

The first thing I did was to cut the first cylinder head in half with my hacksaw, cutting through the centre of the camchain tunnel; not to any particular size, just in half. I always use 18 TPI Bahco Sandflex hacksaw blades for sawing aluminium as they cut really well, last a long time and don’t break.

It’s important to have a good-quality hacksaw blade with sharp teeth to help you cut straight, remembering to let the blade cut and find its way rather than forcing it through the metal.

Denne historien er fra May 2020-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra May 2020-utgaven av Classic Motorcycle Mechanics.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA CLASSIC MOTORCYCLE MECHANICSSe alt
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021