A Tapping Attachment for Small Taps
Model Engineers' Workshop|April 2020
During my engineering apprenticeship and while working as a toolmaker spanning 40+ years I would imagine I must have tapped countless thousands of holes.
Graham Meek
A Tapping Attachment for Small Taps

During that period, I count myself lucky in that I never suffered a broken tap at work. At home however that is a different matter. I remember the fi rst tap that I broke was a 6BA, I was 16 and had just started work. The job in question was a Stuart 10 V steam engine cylinder casting and I was tapping the cylinder cover retaining holes. The tap was coming through the cylinder fl ange and I was about to remove the tap, but wanted just one more thread, (big mistake). Below the fl ange there was a cast radius that blends the fl ange to the cylinder outer wall. The tapping drill had probably wandered a little as it met the radius and the tap was probably being forced to the one side, hence the breakage. Luckily for me the broken tap was removed on the Toolroom “Disintegrator”, what we used to call “Spark eroders” when they fi rst came out, as this was their primary role at that time.

I seemed not to suffer any more tap breakage calamities through the intervening years until I retired about 7 years ago. When in quick succession I manage to go through about one set of 10BA and two individual 8BA taps like they were going out of fashion. I then recounted the 6BA tap saga above, it is funny how these things stick in one’s mind. I was beginning to think that BA taps and I were “Jinxed”. Recalling the breakage instances, in every case I had been tapping freehand with no support, this was one of my problems. The other I was not to find out until some months later, when I was told I had been suffering some minor muscle spasms which were producing a hardly perceptible involuntary twitch in my arms.

Denne historien er fra April 2020-utgaven av Model Engineers' Workshop.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra April 2020-utgaven av Model Engineers' Workshop.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA MODEL ENGINEERS' WORKSHOPSe alt
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020