From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop|May 2020
Giles Parkes, MEW Issue 64, February/March 2000
Giles Parkes
From the Archives: Twist drill Sharpening by the Four Facet Method

I am an old newcomer to engineering workshop practice and I don’t suppose I shall live long enough to learn to sharpen twist drills properly freehand. I have made many attempts and I sometimes succeed in getting a drill which cuts true and to size, but what I want is consistency. Many devices have been studied and tried for grinding the clearance correctly, but I can’t make most of them produce an accurate drill repeatedly.

As all proper engineers know, the first essential is to have two cutting edges of equal length and at the same angle to the axis of the drill. The second is to have the clearance equal on each side and the third is to be able to change angles and clearances for different materials. Provided that the drill can be offered to the grindstone at a predetermined angle, it should not be difficult to obtain a consistently good drill. I therefore turned my thoughts to a jig to make this possible, and at the same time I chanced upon articles by D. A. G. Brown on four facet drill sharpening (ModeI Engineer Vol. 172 Nos. 3690 and 3692). His jig makes it almost impossible not to grind a drill properly, but it is confined to small drills up to about 3mm. I wanted to sharpen larger drills to the same high standard, and ER20 spring collets provided the next answer when I was told that they will hold a drill accurately by the lands. They have the advantage that each collet has a holding range of 1mm, so all drills from 3mm to 13mm, metric or Imperial can be held in relatively few of them.

My Jig

Denne historien er fra May 2020-utgaven av Model Engineers' Workshop.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra May 2020-utgaven av Model Engineers' Workshop.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA MODEL ENGINEERS' WORKSHOPSe alt
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020