Mill RPM Display
Model Engineers' Workshop|December 2019
Andrew Carruthers fi ts a speed readout to his Tom Senior mill
Mill RPM Display

As a newcomer to our hobby and with little practical engineering experience I was filled with both trepidation and eagerness in equal measure to jump in and get started. One of the challenges to setting up a workshop is identifying suitable machinery and I soon found myself hankering after a milling machine. Without wishing to spend a fortune, my options are limited to the pre-owned market which brings its own challenges.

I had the good fortune to find a Tom Senior M1 in well cared for condition and as far as I can tell, light previous use. As is the case with older machinery, some of the “bells and whistles” we rely upon are not available. Unfortunately, experience is acquired over time and having broken several cutters, it was suggested by a retired toolmaker friend that I may be running the mill too slowly. Hence this project was born, to set correct rotation speed according to size of cutter and material being machined

Photograph 1 shows the finished display clip mounted on the Digital Readout (DRO). I also wanted the end result to be aesthetically pleasing and in-keeping with the DRO I am installing (which may be the subject of another article) but at the same time be easily differentiated so I chose the Blue display to contrast with the Red DRO display.

This modification is inexpensive, is a quick project to build and delivers valuable information to the operator. Only basic soldering skills and a few readily available parts from either your spares bin or online are required, the display case can be made from offcuts, or if available, 3D printed which is the route I took.

The project can be re-purposed to any other machinery where rotation speed needs to be determined.

Denne historien er fra December 2019-utgaven av Model Engineers' Workshop.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra December 2019-utgaven av Model Engineers' Workshop.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA MODEL ENGINEERS' WORKSHOPSe alt
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020