Routers & Router Tables
Good Woodworking|May 2017

Routers are great tools for shaping edges in furniture making, but they also have a number of other uses too, as John Bullar shows in the next part of this series.

Routers & Router Tables

Routers are great for shaping edges – turning a plain square-edged board into a friendly round-edged tabletop, for example  – but they also have a multitude of other uses. While this article is a general introduction to using the hand-held router and the router table in furniture making, being such a versatile tool, router applications also crop up in other parts of this series.

Simple origins

The first type of furniture maker’s router was a humble block plane with a narrow blade protruding beneath it, which was intended for routing out deep channels or rebates.Early makers would also own a set of moulding planes, often running into dozens, for shaping the edges of panels and cabinet tops. Over the past 100 years, the electric router has progressively replaced both these tools.

In theory, a modern router is simple enough: a geared electric motor is vertically mounted over a flat plate known as the ‘sole’, which slides across the wood. A cutter, clamped to the motor spindle, pokes through the middle of the sole to cut the wood beneath. The motor can be lowered to cut deeper and raised to reduce or stop cutting, usually with a spring-loaded ‘plunge’ mechanism.

Putting this into practice requires planning and care. You can work freehand to make a groove just a few millimetres deep with a small diameter cutter, such as for patterns or signing your initials on a piece of wood . However, for larger or deeper grooves, the router must be guided to stop it running away and damaging the wood. We will look further into this below, but first a word on cutters.

Cutting bits

Denne historien er fra May 2017-utgaven av Good Woodworking.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra May 2017-utgaven av Good Woodworking.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA GOOD WOODWORKINGSe alt
Game Changing Chisels
Good Woodworking

Game Changing Chisels

The Axminster Rider chisel range aims to change the game for affordable quality tools, and if the sets tested here are anything to go by then this is a very exciting prospect indeed

time-read
4 mins  |
February 2017
Good Woodworking

Bring Your Projects To Life

If you’re looking for a way to transform a mundane substrate into a stunning piece of work, then take a look at these two veneer packs – both offer a great introduction to veneering and are ideal for use on a variety of small projects

time-read
2 mins  |
February 2017
From Apprentice To Skillbuild Judge
Good Woodworking

From Apprentice To Skillbuild Judge

SkillBuild judge Tibby Singh gives us a glimpse behind the scenes in terms of what this important competition involves, and tells us how his passion for championing young and upcoming talent makes his job all the more worthwhile

time-read
7 mins  |
February 2017
Techniques For Turning Part 1
Good Woodworking

Techniques For Turning Part 1

In the first of a two-part series focusing on woodturning techniques, Bob Chapman begins by looking at those techniques used for turning bowls, as well as beginning to discuss various finishing and colouring methods.

time-read
10+ mins  |
March 2017
Rings Of Doom
Good Woodworking

Rings Of Doom

Don’t despair of ringmarks on your furniture, advises Stephen Simmons.

time-read
4 mins  |
March 2017
Top Tips for Buying Woodworking Machinery
Good Woodworking

Top Tips for Buying Woodworking Machinery

Alex Dalton, managing director of Daltons Wadkin, takes a closer look at some of the top things to consider when making a woodworking machinery purchase.

time-read
4 mins  |
March 2017
Home sweet home
Good Woodworking

Home sweet home

Jumping to the aid of new home buying family members, Glenn Perry sets about replacing an old, worn out door with a custom-made framed ledge and braced version.

time-read
4 mins  |
March 2017
Great Expectations
Good Woodworking

Great Expectations

The front door opens at The Old Vic’, the central character in a serialised story of everyday adventures in woodworking (among other things).

time-read
6 mins  |
May 2017
Dombey & Son
Good Woodworking

Dombey & Son

Dave Roberts finds that keeping up with the times isn’t always the same as making progress.

time-read
6 mins  |
September 2017
Good Woodworking

Extracting Broken Screws:​​​​​​​what To Do When Things Get Stuck!

As Mike McCrory says, if you’ve ever used small brass screws in hardwood, you’ll have undoubtedly run into issues. Here he offers his advice on dealing with the problem as well as advising how to avoid this happening the first time around.

time-read
4 mins  |
September 2017