Lubricant Selection and LIS: Fight the Current Lack of Supply
MACHINERY LUBRICATION INDIA|July/August 2023 Issue
Jim Fitch wrote a pretty comprehensive article recently, going into the finer minutia of what to do when you can't get the lubricants that you normally use. I wanted to take some time and give you a pretty good strategy to help mitigate some of the woes of having to swap suppliers to get the lubricants that your machines need for proper operation.
Jeremie Edwards
Lubricant Selection and LIS: Fight the Current Lack of Supply

First off, don't be brand loyal. The lubricant manufacturers aren't paying your bills. They aren't loyal to you - they sell to your competitors. Unfortunately, you just aren't that special to them, so you don't owe them anything.

Formulations might be "unique" from brand to brand, but that doesn't mean that your current lubricant is the only one that can get the job done (and done well).

Start looking at the technical specifications for these lubricants and the specific needs of the equipment versus looking for a specific brand of lubricant.

Technical Specs

One of the first things you are going to want to do is label your oils. Not the way that most folks do it, with the brand name and whatever iteration of oil/grease it is, but with the technical specifications for the given lubricant.

Denne historien er fra July/August 2023 Issue-utgaven av MACHINERY LUBRICATION INDIA.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra July/August 2023 Issue-utgaven av MACHINERY LUBRICATION INDIA.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA MACHINERY LUBRICATION INDIASe alt
The Secrets For Implementing A Clean lubricant Program
MACHINERY LUBRICATION INDIA

The Secrets For Implementing A Clean lubricant Program

If you could find an investment that guaranteed a return 40 times greater than your initial investment, you probably wouldn't pass it up.

time-read
4 mins  |
March - April 2024
MAINTAIN? REPAIR? REPLACE?
MACHINERY LUBRICATION INDIA

MAINTAIN? REPAIR? REPLACE?

When considering the life of any asset, the question arises: what types of interventions should be planned to keep it operating or to restore operation in the event of its failure?

time-read
4 mins  |
March - April 2024
Engineering Reports Should Be Like Bad Movies
MACHINERY LUBRICATION INDIA

Engineering Reports Should Be Like Bad Movies

I'm frequently asked to review engineering reports, and I'm continually baffled by how many engineers want to take their readers on a journey instead of getting to the point.

time-read
7 mins  |
March - April 2024
WHY SCHEDULED OIL CHANGES AREN'T ENOUGH TO MITIGATE LUBRICANT CONTAMINATION
MACHINERY LUBRICATION INDIA

WHY SCHEDULED OIL CHANGES AREN'T ENOUGH TO MITIGATE LUBRICANT CONTAMINATION

There are few problems more insidious or damaging to large industrial machinery than contaminated lubricant.

time-read
4 mins  |
March - April 2024
LUBRICATION CONTAMINATION PREVENTION
MACHINERY LUBRICATION INDIA

LUBRICATION CONTAMINATION PREVENTION

How many articles have you read, or seminars listened to, that tout the value of contamination control? If you are like me, they number in the hundreds—if not thousands. One thing about these articles and seminars that bothers me is the word “control”.

time-read
6 mins  |
March - April 2024
LUBRICANT CONTAMINATION PREVENTION AND MITIGATION: A Guide For Maintenance Professionals
MACHINERY LUBRICATION INDIA

LUBRICANT CONTAMINATION PREVENTION AND MITIGATION: A Guide For Maintenance Professionals

Lubricants are essential for the smooth and efficient operation of many types of machinery, from engines and turbines to gears and bearings.

time-read
5 mins  |
March - April 2024
TASK-BASED TRAINING | INSPECTING A SINGLE-POINT LUBRICATOR
MACHINERY LUBRICATION INDIA

TASK-BASED TRAINING | INSPECTING A SINGLE-POINT LUBRICATOR

A single-point lubricator is a device engineered to attach to a single unit to regularly and automatically deliver a small amount of clean grease or lubricating oil to a specific area.

time-read
3 mins  |
March - April 2024
TOP LEADERSHIP FOCUSES FOR IMPROVED RELIABILITY AND COST REDUCTION
MACHINERY LUBRICATION INDIA

TOP LEADERSHIP FOCUSES FOR IMPROVED RELIABILITY AND COST REDUCTION

Here’s a scenario that may sound eerily familiar – you have a new reliability initiative.

time-read
4 mins  |
March - April 2024
4 KEY ELEMENTS FOR INTERPRETING AN OIL ANALYSIS REPORT
MACHINERY LUBRICATION INDIA

4 KEY ELEMENTS FOR INTERPRETING AN OIL ANALYSIS REPORT

Years ago, a customer came into my office, visibly upset. He had just received his second oil analysis report for one of his Caterpillar gas engines.

time-read
4 mins  |
March - April 2024
ASTM ENHANCEMENTS TO MICROSCOPIC PARTICLE IDENTIFICATION AND DOCUMENTATION
MACHINERY LUBRICATION INDIA

ASTM ENHANCEMENTS TO MICROSCOPIC PARTICLE IDENTIFICATION AND DOCUMENTATION

In 1982, Daniel Anderson published his influential book, \"Wear Particle Atlas\", which describes, sizes, and classifies particles found in oil.

time-read
4 mins  |
March - April 2024