The Blue 'Max
100% Biker|Issue 252
It was some fifteen years ago that I bought this bike as a stock, full power V-Max. I hitched a ride to Southampton, bought the ’Max and rode it back to Cornwall! Back then it had just 8000 miles on the clock and although I’d always intended to customise it [Steve is a member of NCC Kernow, so the customising part goes without saying. Ed], I never thought that it would turn out the way that it has…
Steve (Ncc Kernow)
The Blue 'Max
I initially rode it around as a stock bike but I soon wanted to change things! So I contacted Steve Taylor at Taylormade to enquire about a fat rear end as I’d seen other Maxs with this done. I struck a deal with Steve for one of his 250mm split rim solid alloy wheels with tyre, modified swinging arm and billet caliper. Now I had the wide rear end I wanted, I then uprated the rear shock absorbers and changed the seat unit.

I bought a complete front end from a crash damaged 2008 Kawasaki ZX6R and Jim, a mate of Col’s at Thor Motorcycles, made a set of billet yokes, 3-inch extensions for the forks and all the spacers for the wheels and calipers. A top job—thank you, Jim. I then resprayed the frame and bodywork and that’s how it stayed for a couple of years.

But then I decided that I wanted to change things again! I set about cutting off the rear subframe and modified the swinging arm to accept a mono shock set-up. The stock fuel tank was removed and I bought a Slingshot tank to mount over the standard air box. And that was as far as I got…

Now, I’ve lost count of how many times I’ve heard it say that you can’t chop a V-Max. So, with the ’Max sitting unfinished in the corner of the garage, I wanted to prove all those people wrong and build something that, as far as I knew, no-one had done before with a V-Max. So I started to build a jig in order to fabricate my own one-off hardtail frame.

I had most of what I needed in the way of wheels, forks and, of course, the engine. So, first things first, I positioned the engine and rear wheel in my new jig and then I offered up the front end and stood back to look at the lines. More rake was needed, so I pushed the front wheel forward by another couple of inches.

Bu hikaye 100% Biker dergisinin Issue 252 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye 100% Biker dergisinin Issue 252 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

100% BIKER DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
100% Biker

There's No Place Like Chrome

When settling down to write a feature for a magazine, it’s necessary to have two things, nay, three things in front of you. A computer is useful, it saves all that messy ink and blotting paper that we used in those long gone school days, a strong hot mug of tea should also be on the desk (goes without saying), and finally, a set of scribbled notes that a couple of months ago resembled a detailed description of a motorcycle, but that by now, are largely illegible…

time-read
4 dak  |
Issue 256
Spike And Bob's Big Swedish Adventure: Part 5
100% Biker

Spike And Bob's Big Swedish Adventure: Part 5

In 1979 Hasse took Caprice to the Norrtälje show for the first time, but he had changes for the bike in mind and, during the winter, he picked up a jammer frame and a set of 20-inch tubes.

time-read
7 dak  |
Issue 256
Black Dog Custom Show - The Black Dog, Broadmayne, Dorset
100% Biker

Black Dog Custom Show - The Black Dog, Broadmayne, Dorset

Named after the only pub in the village of Broadmayne near Dorchester, nobody there can quite remember how long the informal get together that is the Black Dog Custom Show has been going

time-read
1 min  |
Issue 254
100% Biker

TWEETY

Over the last couple of years, very few if any motorcycles have inspired such bafflement and scratching of heads as Dan Duggan’s Honda CX500

time-read
7 dak  |
Issue 256
100% Biker

THE DOUBTER

Every project starts somewhere and this one began at the Bike Shed Show at Tobacco Dock in London or, to be more accurate, when my mate Matt Donaldson turned to me and said, “I bet you can’t build a bike good enough for here.” Well, that set me to work!

time-read
3 dak  |
Issue 256
100% Biker

JBS SPECIAL

Jarno comes from a family with petrol in their blood. His father races classic motorcycles and Jarno was raised on a farm where the barns are full of motorcycles instead of cows! This is his very first project, the Jarno Bastian Special

time-read
4 dak  |
Issue 256
100% Biker

CUSTOMBIKE Messe Bad Salzuflen, Germany

Sometimes what is missing from a show is more interesting than what’s present. With the German show Custombike celebrating its fifteenth anniversary, the event remains a showcase for European customising in all its diversity— with the additional benefit of a focus on parts that are homologated and approved for Europe

time-read
5 dak  |
Issue 256
100% Biker

COVERT MISSION

It’s not often that I have to sneak in and photograph a motorcycle without the owner knowing anything about it—something that was made tougher in this case by the said motorcycle being kept at said owner’s house

time-read
4 dak  |
Issue 256
Carry On Screaming
100% Biker

Carry On Screaming

As is often the case, I first caught sight of Nige Biffin’s cool Honda CB750 at a local show last summer, standing out as it did from the stock stuff and the classics present. Not surprisingly, it wasn’t just the ace paint that grabbed my attention, but the obvious quality of the build throughout. I needed to know more…

time-read
3 dak  |
Issue 255
Paul's Harley
100% Biker

Paul's Harley

Ensuring that a custom motorcycle will comfortably chew up the miles is perhaps not always one of the main priorities for every builder, but for anyone in the National Chopper Club, it’s essential. Never more so than when you happen to live in one of the far flung parts of this island which means that you’ve usually got a journey to do before you even start going anywhere, as Paul, NCC National Secretary and member of Chopper Club Kernow, knows all too well. This is the story of his latest chop.

time-read
3 dak  |
Issue 255