Multimeters!
Classic Motorcycle Mechanics|March 2020
If you have an electrical fault on your bike the only realistic way to find it is with a multimeter.
Multimeters!

When I was a lad the Avo 8 was the meter to have and was well beyond my pocket. Even then there were cheap and cheerful multimeters, but they were not especially accurate and weren’t in the slightest bit robust. There is still a massive range of meters available, from the high-end professional apparatus to the cheapest for occasional use. For this article, I have chosen a range from the cheapest at a fiver (+VAT) to my own, which set me back around £300 (plus VAT Bastard’s pound of flesh) and they basically all do the same job. I am addicted to nice tools so always want to have the best quality tools I can afford. To be fair I do use my meter far more than the average classic bike enthusiast and being of such good quality it will probably see me out.

Bu hikaye Classic Motorcycle Mechanics dergisinin March 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye Classic Motorcycle Mechanics dergisinin March 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

CLASSIC MOTORCYCLE MECHANICS DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 dak  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 dak  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 dak  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 dak  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 dak  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 dak  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 dak  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 dak  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 dak  |
July 2021