Its feels strange to me, not attending shows or riding to bike meets, but I have been riding my Z1 Super Six quite a lot and have now clocked up 650 miles. I’ve had a few issues with chain run and squeal from the brakes, but more on that another time!
My friend Neil Haworth called round with his 1978 Z1-R Turbo for me to make a stainless steel exhaust and sort out the jetting of a new Mikuni 44mm pumper carb that he had bought to replace the standard fixed jet Bendix carb. The existing exhaust pipework that came with the bike was in poor shape, and was originally from a GPZ1100 drag bike so the exhaust headers were longer. When fitted, the header would hit the front mudguard if the forks were compressed. The first thing I had to do was make the headers fit the bike by cutting about 50mm from each pipe, then machine up new stubs to weld back on.
The headers then fitted tight to the frame and cleared the mudguard at full compression of the forks.
Bu hikaye Classic Motorcycle Mechanics dergisinin October 2020 sayısından alınmıştır.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Giriş Yap
Bu hikaye Classic Motorcycle Mechanics dergisinin October 2020 sayısından alınmıştır.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Giriş Yap
Honda VFR750R - RC30
If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…
Mountain tension!
Award-winning motorcycle engineer!
Fazer set to STUN!
What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.
Project Suzuki TS400 Part 8 Loom with a view!
We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?
Project Yamaha TX750 Part 12 A question of balance…
Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?
Splitting links
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.
STAVROS: PRINCE OF PRANKSTERS!
It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.
Metal magic!
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .
