Soon the bulker was free, and the 6,000-hp tug on its starboard quarter held the vessel in place as the wind and current nudged the hull.
“We’re going to kind of hold them up,” Capt. Bobby McGuire said of the bulker River Pearl, which was setting sail from a midstream mooring field near the North Charleston Terminal. “We are going to be their stern line and just kind of hold them up here.”
The job of holding, and eventually turning, River Pearl was the first of two back-to-back jobs for James A. Moran and its 6,140-hp, 110-foot counterpart Elizabeth Turecamo. James A. Moran pushed away from the North Charleston container port about an hour earlier on a sunny, warm fall afternoon and headed northeast.
The midstream mooring field occupied by River Pearl and another bulker lay less than a mile ahead in a quiet stretch of the Cooper River well north of Charleston’s historic downtown. For much of the previous week, the 618foot River Pearl offloaded scrap metal onto barges. Those vessels in turn carried the cargo to its final destination at the Nucor Steel Berkeley mill about 10 miles farther inland.
Midstream moorings like this one operated by Maybank Industries are common on the Mississippi River but something of a rarity in big ports like Charleston. These facilities require a completely different process for tying up and releasing mooring lines. Crews aboard small skiffs set the lines, or release them depending on the circumstances, from buoys fore and aft of the ship.
Line handlers from Moran Environmental Recovery stood by as James A. Moran transferred docking pilot Warren Tawes and Charleston Branch pilot Doug Logan aboard River Pearl. From there, McGuire circled back around the ship and got a line on the port quarter. One by one, crews freed a line then zipped to the opposite side to release a corresponding rope.
Bu hikaye Professional Mariner dergisinin March 2020 sayısından alınmıştır.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Giriş Yap
Bu hikaye Professional Mariner dergisinin March 2020 sayısından alınmıştır.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Giriş Yap
Mariner's role still unknown as autonomous shipping gains speed
Mariners’ role still unknown as autonomous shipping gains speed
Piracy edges closer to home with wave of raids in southern Gulf
In the brief cellphone video recorded by a crewmember on the offshore supply vessel (OSV) Remas, the pirates walk back and forth on the deck of the ship, clenching their guns and using them to point as they order around the crew. Their faces are draped in clothing and bandanas.
Casualties
NTSB: Dredge hit Texas gas pipeline, causing fire that killed four
IMO emissions report raises new concerns about methane slip
A recent report from the International Maritime Organization (IMO) reveals that global shipping emissions increased nearly 10 percent from 2012 to 2018, with the industry facing a growing challenge concerning methane slip.
Bay State brothers find industry niche by making old into new
Zero non-conformities is what you want to hear when the U.S. Coast Guard inspects your tugboat. Once you’ve prepared your vessel, the inspectors come aboard to peruse your paperwork. They ask you pointed questions, to which they expect straightforward answers. Perusal completed, they then scrutinize all of the related safety systems, from bilge to antennas — even the ship’s bell.
Signals
A year into the pandemic, thousands ‘essentially indentured’ on ships
Analysis points to faulty loading, low ballast in Golden Ray rollover
While the salvage of the sunken vehicle carrier Golden Ray has been delayed for months due to COVID-19 and the hurricane season, analysis by the U.S. Coast Guard has determined a possible cause for the rollover: a combination of vehicles placed too high on the ship’s decks, and not enough ballast water gave the placement of the cargo.
Seastreak newcomer pushing through dip in demand
Two years ago, Seastreak LLC took delivery of Seastreak Commodore, a 600-passenger fast ferry, from Gulf Craft of Franklin, La. Designed by Australia-based Incat Crowther, the vessel is the largest of its kind in the United States and was built to meet the burgeoning demand for service in the New York-New Jersey market.
New year in a new world: Navigating COVID's maritime realities
In a matter of days, the decorative time balls will drop, “Auld Lang Syne” will fill the air, and ships at anchor will sound their horns as the world welcomes in the new year.
Advanced props, rudders provide new efficiencies below the waterline
It took a decade or two from the invention of the marine propeller in the 19th century for the technology to become widely accepted. Thereafter, adoption has been nearly universal, but progress toward improved efficiencies has come in fits and starts.
