Before You Build Precautions
The Complete Build Your Own PC Manual|October 2020
Nothing will spoil the joy of building your own PC faster than damaging a critical component before you have even fitted it inside the case. Although there is no need to be scared of a first-time build, there are simple things you can do to prepare for it. Some of the main concerns include electrostatic discharge, dropped parts and damage caused by forcibly fitting together parts or scratched circuits.
Before You Build Precautions

ELECTROSTATIC DISCHARGE

Whenever we move around, particularly on certain surfaces like carpet, our bodies pick up tiny amounts of electricity. This can then be released when we touch conductive surfaces such as metal. Accidental electrostatic discharge can destroy PC hardware but in practice you only need to take the most basic precautions.

You can buy grounded wrist straps fairly cheaply and while they are a little over the top, they can give the novice builder peace of mind. The most basic precaution is to occasionally touch a ground, such as a metal office desk or the metal case of a plugged-in system, to discharge your body. However, even when ESD does occur, it’s more likely to follow the component’s ground plane rather than blow its most sensitive parts.

ELECTRIC SHOCK

When working on your PC or any mains powered equipment, always disconnect it completely from the mains wall socket. Never dismantle the actual PSU in your PC. This unit contains potentially lethal mains voltages, even when it is disconnected from the supply. They are not user repairable. If it fails, replace it with a new one.

CONNECTIONS

Bu hikaye The Complete Build Your Own PC Manual dergisinin October 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye The Complete Build Your Own PC Manual dergisinin October 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

THE COMPLETE BUILD YOUR OWN PC MANUAL DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Do You Need An Optical Drive?
The Complete Build Your Own PC Manual

Do You Need An Optical Drive?

Building a PC a few years ago without an optical drive would have seemed like madness. It would have made using the PC fairly difficult as most software was supplied on discs and Internet speeds were not really up to the task of downloading large files such as games. Nowadays, almost everything you might want to install on your PC can be bought electronically and discs are becoming somewhat obsolete. So do you actually need to install a CD/DVD drive?

time-read
2 dak  |
January 2021
The Right RAM
The Complete Build Your Own PC Manual

The Right RAM

A fast and easy way to add a performance boost to your PC is to install high quality, fast RAM (Random Access Memory). DDR4 is the latest variation of PC memory and is the fastest and most efficient yet but just like many other components in your build, RAM isn’t quite as simple as it might at first seem. Different motherboards support different maximum amounts, as do different operating systems and it is available in many different speeds and configurations.

time-read
5 dak  |
January 2021
Expansion Cards and Extras
The Complete Build Your Own PC Manual

Expansion Cards and Extras

Expansion cards are technically any printed circuit board that can be added to the system to add functionality or features. This means that a graphics card is an expansion card, albeit a fairly fancy one, and you can run a PC without including one, assuming the motherboard has on-board graphics. Here we will look at some of the other expansion card options you may want or need in your build.

time-read
2 dak  |
January 2021
Fitting The Motherboard Into The Case
The Complete Build Your Own PC Manual

Fitting The Motherboard Into The Case

If you have been following the steps of the build so far, you should now be in a position to fit the motherboard, along with the fitted CPU, cooler and RAM, into your prepared case. This not only involves screwing the board into place but also correctly connecting all the case controls like the power switch, HDD LED, front USB ports etc.. Your motherboard will also have been supplied with a back plate.

time-read
4 dak  |
January 2021
Troubleshooting Your Build
The Complete Build Your Own PC Manual

Troubleshooting Your Build

Hopefully, if you have followed all of our instructions carefully, you won’t have any problems during the first boot of your new PC. However, problems can and do occur, even for experienced builders. The difference between a beginner and an experienced builder is the ability to solve problems and troubleshoot the PC build. If you have a problem with your computer, it will likely be one of these.

time-read
5 dak  |
January 2021
Preparing the Case
The Complete Build Your Own PC Manual

Preparing the Case

Choosing a case used to be almost an afterthought when building a custom PC. One grey box was much the same as another grey box. Thankfully the days of grey boxes are well and truly over and our choice of PC case ranges from tiny media boxes designed to go next to a TV, to bespoke glass towers aimed at those who want to show off their perfectly co-ordinated components. However, whichever case you choose, some preparation is needed before beginning your build.

time-read
2 dak  |
January 2021
Upgrading to Windows 10 from Windows 7 or 8.1
The Complete Build Your Own PC Manual

Upgrading to Windows 10 from Windows 7 or 8.1

If you have an existing copy of Windows 7 or 8.1 on disc, not being used on another active PC, you can use this for the initial install of Windows and then upgrade to Windows 10 afterwards or at a later date. You have missed the deadline for the free upgrade to 10 but it is quite likely that Microsoft will reopen that offer, or run similar discounted offers, for their new OS in the near future. This guide assumes you are taking this route to Windows 10, rather than a fresh install.

time-read
6 dak  |
January 2021
Need More Power?
The Complete Build Your Own PC Manual

Need More Power?

The role of a PC power supply unit is to convert the AC electric power that comes from the mains to the DC power that the computer requires. However, it can do much more than that. A good quality power supply can make your system more efficient, stable and reliable. The power supply is often the first component to fail in an older system, so making sure you understand the full role of the PSU in your build is very important.

time-read
5 dak  |
January 2021
Navigating Your Motherboard
The Complete Build Your Own PC Manual

Navigating Your Motherboard

We will be referring to specific parts of the motherboard in detail as we work our way through the build but for now it is a good idea to familiarise yourself with how a standard motherboard is laid out, where the sockets and ports will be, and what they look like. There will be some slight variations in location of sockets and features between different motherboards but most will follow this general layout pattern.

time-read
6 dak  |
January 2021
Final Checks and First Boot
The Complete Build Your Own PC Manual

Final Checks and First Boot

If you have followed all of the build steps thus far, you should now be at the point where the first boot up is looming. Before you do, it is worth going back and checking that everything is ready, all cables are connected and everything is looking good. First boot doesn’t mean that you can’t go back and change things later but you can avoid problems by doing a few simple checks.

time-read
5 dak  |
January 2021