Home sweet home
Good Woodworking|March 2017

Jumping to the aid of new home buying family members, Glenn Perry sets about replacing an old, worn out door with a custom-made framed ledge and braced version.

Home sweet home

My niece and her fiancée recently purchased an early 19th-century terraced cottage in Epping Forest. The front door, a traditional design, had suffered from exposure to our damp weather . Without a front porch or canopy to protect it, years of rain had run down the outside causing serious rot to the bottom .The door, made of European redwood, a softwood,was not original. With a framed ledge and braced construction, it is a standard joinery item, but at around 1.9m high and 711mm wide, it is not a standard size, being a lot smaller than a modern, off the peg one. I have seen quite a few standard doors trimmed to within an inch of their life to fit a much smaller frame. One I saw recently had a 75mm wide bottom rail, which probably started off at 150mm.

Weighing up the job

I agreed to make a new door. I inspected the existing door frame and it appeared sound. The door only had a Yale-type lock/latch, so a five-lever mortise lock would have to be fitted for security and insurance reasons. I would keep the existing lock in the same position. Using metric sizes, the exterior door would be made 44mm thick. The match boarding or TGV is 88mm wide when fitted together and is 14mm-thick. As the match boarding would run the whole length vertically from the 44mm-thick top rail to the bottom, it would mean the bottom rail and the middle ledge would be 30mm-thick (I actually made this a fraction under).

Bu hikaye Good Woodworking dergisinin March 2017 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye Good Woodworking dergisinin March 2017 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

GOOD WOODWORKING DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Game Changing Chisels
Good Woodworking

Game Changing Chisels

The Axminster Rider chisel range aims to change the game for affordable quality tools, and if the sets tested here are anything to go by then this is a very exciting prospect indeed

time-read
4 dak  |
February 2017
Good Woodworking

Bring Your Projects To Life

If you’re looking for a way to transform a mundane substrate into a stunning piece of work, then take a look at these two veneer packs – both offer a great introduction to veneering and are ideal for use on a variety of small projects

time-read
2 dak  |
February 2017
From Apprentice To Skillbuild Judge
Good Woodworking

From Apprentice To Skillbuild Judge

SkillBuild judge Tibby Singh gives us a glimpse behind the scenes in terms of what this important competition involves, and tells us how his passion for championing young and upcoming talent makes his job all the more worthwhile

time-read
7 dak  |
February 2017
Techniques For Turning Part 1
Good Woodworking

Techniques For Turning Part 1

In the first of a two-part series focusing on woodturning techniques, Bob Chapman begins by looking at those techniques used for turning bowls, as well as beginning to discuss various finishing and colouring methods.

time-read
10+ dak  |
March 2017
Rings Of Doom
Good Woodworking

Rings Of Doom

Don’t despair of ringmarks on your furniture, advises Stephen Simmons.

time-read
4 dak  |
March 2017
Top Tips for Buying Woodworking Machinery
Good Woodworking

Top Tips for Buying Woodworking Machinery

Alex Dalton, managing director of Daltons Wadkin, takes a closer look at some of the top things to consider when making a woodworking machinery purchase.

time-read
4 dak  |
March 2017
Home sweet home
Good Woodworking

Home sweet home

Jumping to the aid of new home buying family members, Glenn Perry sets about replacing an old, worn out door with a custom-made framed ledge and braced version.

time-read
4 dak  |
March 2017
Great Expectations
Good Woodworking

Great Expectations

The front door opens at The Old Vic’, the central character in a serialised story of everyday adventures in woodworking (among other things).

time-read
6 dak  |
May 2017
Dombey & Son
Good Woodworking

Dombey & Son

Dave Roberts finds that keeping up with the times isn’t always the same as making progress.

time-read
6 dak  |
September 2017
Good Woodworking

Extracting Broken Screws:​​​​​​​what To Do When Things Get Stuck!

As Mike McCrory says, if you’ve ever used small brass screws in hardwood, you’ll have undoubtedly run into issues. Here he offers his advice on dealing with the problem as well as advising how to avoid this happening the first time around.

time-read
4 dak  |
September 2017