REALME TECHLIFE ROBOT VACUUM

ROBOT VACUUM - Sweeping and mopping the floor daily is a basic yet quite tedious house chore. With the new realme TechLife Robot Vacuum, this process is conveniently automated, so you have more time for the more important stuff.

- MARIBELLE ALBA

DESIGN

Like other similar products, the realme TechLife Robot Vacuum is a disc, much like a flying saucer, particularly with the raised LiDAR unit protruding from the center of the upper surface. It is 350mm in diameter and 100mm high.

On the upper surface, you will also find the Power and Home buttons. On the front side of the plastic casing are the sensors and a pressure-sensitive bumper, while at the back is the removable dust container.

On the underside are the fall sensors, the drive wheels, and a guide wheel, beside which are the charging contacts. Alongside these are the side brushes, while the large removable main brush is found across the center of the disc, slightly behind the drive wheels and adjoining the dust container.

HARDWARE

The centerpiece of the TechLife Robot Vacuum is its LiDAR Smart Mapping and Navigation System that is capable of 360-degree real-time laser scans. This is complemented by 38 side infrared sensors for more precise and accurate navigation, so it can safely go under or around furniture.

It delivers four levels of suction strength up to a maximum of 3000Pa. In quiet mode, it operates at only 55dB noise level. Three filter layers, including a HEPA filter, screen out up to 99% of PM2.5 particles, ensuring that fine dust is captured inside the dust bin.

With its large 5200mAh battery, the TechLife Robot Vacuum can clean continuously for up to 300 minutes or 5 hours. The package comes with a charging base with a simple but neat cable management system.

USER EXPERIENCE