BUILDING BENCH & WORKSHOP TIPS
Model Airplane News|February 2021
I have built countless RC models, from kits, plans and even my own scratch designs.
GERRY YARRISH
BUILDING BENCH & WORKSHOP TIPS

For the most part, building an RC model is a lot easier than most beginners might think. If you have assembled a few ARFs in the past however, you’ll have the basic knowledge of how things go together so by choosing a simpler design to start with, you’ll do just fine. Just don’t start with a B-17 bomber of a P-51 Mustang!

THE BASICS

Here are some of the basics to keep in mind while setting up your workbench.

Keep it straight. In my workshop I use two interior grade hollow-core doors from the home-improvement store, and made the legs and edge bracing using 2x4s and 1x4 boards all screwed together. Placed end to end, I have one long 16 x 3 1/2 foot wide work surface. A good working height for most benches is usually between 32 and 36 inches. But you can make your workbench as long and as high as you like, just keep it level and well lit. Some of my friends prefer a workbench placed in the center of their workshop so they have access to their project from all around. My setup has the big workbench up against a wall with a shorter bench on the opposite wall. I also have a smaller but sturdier work table for my heavy tools like my drill press, and bench grinder.

هذه القصة مأخوذة من طبعة February 2021 من Model Airplane News.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

هذه القصة مأخوذة من طبعة February 2021 من Model Airplane News.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

المزيد من القصص من MODEL AIRPLANE NEWS مشاهدة الكل
Model Airplane News

Legend Hobby / Seagull Models - Cessna Grand Caravan 208

The Cessna Grand Caravan 208 is a legend in aviation circles. A single engine utility aircraft that punches up with capabilities that rival many twin engine aircraft in its class. Its seemingly simple configuration belies its near extreme utility.

time-read
8 mins  |
January 2022
Model Airplane News

PROPER CG LOCATION FOR AEROBATICS

If you are getting into aerobatics and are starting to perform more advanced maneuvers, it is time to discuss ways you can not only become a better pilot, but how you can also improve the flight characteristics of your airplanes.

time-read
5 mins  |
January 2022
Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1
Model Airplane News

Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1

This famous multi-mission single engine observation aircraft served from 1950-1974. From calling out target locations to providing intel/recon information, the Bird Dog was a valued asset in both the Korean War and Vietnam.

time-read
1 min  |
January 2022
EARN YOUR WINGS
Model Airplane News

EARN YOUR WINGS

10 Tips for First-Flight Success

time-read
6 mins  |
January 2022
Old School Model Works Fifty Six
Model Airplane News

Old School Model Works Fifty Six

The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.

time-read
1 min  |
January 2022
Model Airplane News

FLYING TWINS Multi-engine warbirds made easy

Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.

time-read
6 mins  |
January 2022
HOW TO BALANCE PROPELLERS
Model Airplane News

HOW TO BALANCE PROPELLERS

Four easy steps to increase performance and reduce vibration

time-read
5 mins  |
January 2022
PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL
Model Airplane News

PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL

I’m a sucker for shop stuff. I buy tools I will probably never use just because they are cool, or I might need to use them someday. When Glen from RC Plane Stands reached out about a review, however, I knew as soon as I browsed their website that I would be receiving something I would use a lot, maybe even daily.

time-read
2 mins  |
January 2022
Model Airplane News

SPIRIT OF RHINEBECK AWARD WINNER

A close up of Norman Malinowski’s 1/3-scale Albatros

time-read
3 mins  |
January 2022
CENTER OF GRAVITY BASICS
Model Airplane News

CENTER OF GRAVITY BASICS

The secret to a plane that flies well

time-read
6 mins  |
July 2021