Cladding
Quite a simple job. First the blank was cut as shown in fig 10 (see part 4, M.E. 4633, 28th February). The hole positions and bending lines were marked (photo 61) and the sheet rolled to the correct diameter (photo 62), resulting in photo 63. The bends were made by clamping between two lengths of steel in the vice (photo 64) producing photo 65, ready for fitting (or painting, if that's your thing).
Operating handle
On the same drawing (fig 10) is the last item, the operating handle. The parts are straight forward enough (photo 66). I drilled a hole through the boss and the two arms and held the parts together with an 8BA screw for silver soldering (photo 67). Photograph 68 shows the handle in place. It is used to manually operate the pump if need be, for instance when you have no steam or to carry out an hydraulic test. It is removed before running on steam.
This story is from the {{IssueName}} edition of {{MagazineName}}.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the {{IssueName}} edition of {{MagazineName}}.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Sign In
WORKSHOP TIP - Boring Eccentrics
I am making a 1 inch Minnie traction engine and have arrived at the machining of the eccentric straps.
Wenford A 7¼ Inch Gauge 2-4-0 Beattie Well Tank
The stage has now been reached where the well tank body can be completed but beforehand there are some internal details to add.
Vertical Boiler Locomotives
Vertical Boiler Locomotives
Union Nuts, and How to Make Them
These are quite different from those commercially available and are made from copper
SHOWCASE Paul's Engine
One day my son Paul came to me and asked if we could make something in my workshop, so that he could learn engineering processes.
CLUB NEWS
My secret’s out!
Building Dancer - The Boiler
Dancer needed a boiler that would be somewhat larger than the size permitted under the Model Engineering exemptions in the New Zealand regulations.
An Inverted ‘Ross Yoke' Watercooled Stirling Engine
As with all my hot air engines they are cheap to build, mostly from scrap
A Draught Proposal
A Draught Proposal
A Boiler Feed Pump
A Boiler Feed Pump
