Martyn Williams completes the story of his restoration of an Aveling Barford G series FX roller
The biggest job was cleaning the framework and tinwork. It looked very rough, but the metal was sound. It had been painted yellow, but on stripping the paint the usual mid Brunswick green paint could be seen, the colour that it left the factory in 50 or so years ago.
I have not got sand-blasting equipment - this can be a bit brutal on restorations, but can save time and money in the long run. However, I used 80 grit sanding pads and Starchem paint stripper. This combination was a perfect match, as when you apply the paint stripper for the time it takes to drink a cup of tea the paint is ready to remove. The rolls took a lot of cleaning as the paint was very thick and flaky.
A lot of effort was put into taking it down to bare metal, including the engine block. The machine was given two coats of zinc phosphate primer as soon as the bare metal was exposed. Filler was applied to tinwork where required and sanded down, all taking lots of time.
Denne historien er fra March 2017-utgaven av Classic Plant & Machinery.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent ? Logg på
Denne historien er fra March 2017-utgaven av Classic Plant & Machinery.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent? Logg på
HYMAC 580BT Restoration
Having started restoration work on his Hymac 580BT, Jeremy Rowland now looks at the next hurdles to get over as he begins to make progress
The Bigger The Better
The Ariño coal mine is not only one of largest operations in Spain today, but also relies on the services of some of the country’s largest earthmovers, writes Steven Vale
Men At Work!
The MF Hanomag dozer ripping up the earth; the Hanomag company dates back to 1835, building steam engines from which it progressed to making many other types of machinery. The construction division was sold to Massey Fergusson in 1974 and was taken over by the IBH Group in 1980: after the collapse of IBH it became part of Komatsu
Into A New Era Ian Gibson Earthmoving Into A New Era
PETER LOVE visited his good mate Ian Gibson Plant Contractor to see his excellent new premises near Upminster, Essex, and his superbly presented working equipment
GFX gets the works
Martyn Williams completes the story of his restoration of an Aveling Barford G series FX roller
Viva Las Cruces
Coal is important for Spain’s economy, but it is not the country’s only indigenous raw material.
This Was The Place To Be
If you were looking to buy some plant at auction, you couldn’t do better than check out the Euro Auction Sale, held near Selby on January 25, 26 and 27.
Inching back to life
Chris McCullough finds an extremely rare excavator restoration
Eiger Replaces Andes
Tom Pattle, owner of P&S Marine, tells the tale of moving an Eiger to his yard to replace a faithful Andes
Crawlers Star!
Although they are not seen in a plant background, enjoying classic and vintage crawlers, the backbone of the plant working scenario these days, is mostly seen at agricultural events like the National Crawler Championship. It was part of the National Ploughing Championships, which took place on Sunday October 15 near Bishops Lydeard, Somerset, and was well supported by CPM readers. The editor was there to see it happen
