North Carolina Adds Capacity, Maneuverability With New VSP Ferry
Professional Mariner|American Ship Review 2020
On a blistering June day, a sizable crowd gathered in the shade of an outdoor shelter fronting the Hatteras Ferry Terminal on North Carolina’s Outer Banks. Ferries arrived and departed while a new ferry was being christened.
Brian Gauvin
North Carolina Adds Capacity, Maneuverability With New VSP Ferry

Rodanthe, named for the beach town 35 miles north of Hatteras, is the first new ferry to ply the HatterasOcracoke Island route since 2006. Ferries on the route handle approximately 275,000 vehicles annually.

The 183-foot Rodanthe, a 40-vehicle, 300-passenger River-class ferry, will replace the 150-foot, 26-vehicle, 149-passenger Thomas A. Baum, a Hatteras-class vessel due for retirement sometime before 2021.

The North Carolina Department of Transportation (NCDOT) Ferry Division is the second largest in the U.S. behind Washington state. Four of its routes, including the HatterasOcracoke run, are free, and state subsidies keep tolls low for the other three.

As the need for more vehicle and passenger capacity increases, NCDOT is gradually replacing seven Hatteras-class ferries with River-class ferries.

Constructed at Bollinger Shipyards in Amelia, La., Rodanthe is the eighth NCDOT ferry fitted with Voith Schneider propellers (VSP). Southport, the first ferry in the fleet equipped with cycloidal drive propulsion, was designed by Schuller & Allan and built at Steiner Shipyard in Bayou La Batre, Ala., in 1996.

Rodanthe, designed by Elliott Bay Design Group (EBDG), is the first in the fleet with cycloidal units constructed in the U.S. at Voith’s plant in York, Pa. It is the sixth ferry that Seattle-based EBDG has designed for North Carolina, including the larger Sound-class vessels Swan Quarter and Sea Level connecting Ocracoke Island with Swan Quarter on the mainland and Cedar Island.

“The main challenges with respect to Voith Schneider propellers are optimizing the hull to provide good flow conditions for the propellers and structural integration with the vessel,” said Mike Johnson, project engineer at EBDG.

Denne historien er fra American Ship Review 2020-utgaven av Professional Mariner.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra American Ship Review 2020-utgaven av Professional Mariner.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA PROFESSIONAL MARINERSe alt
Mariner's role still unknown as autonomous shipping gains speed
Professional Mariner

Mariner's role still unknown as autonomous shipping gains speed

Mariners’ role still unknown as autonomous shipping gains speed

time-read
6 mins  |
December - January2021
Piracy edges closer to home with wave of raids in southern Gulf
Professional Mariner

Piracy edges closer to home with wave of raids in southern Gulf

In the brief cellphone video recorded by a crewmember on the offshore supply vessel (OSV) Remas, the pirates walk back and forth on the deck of the ship, clenching their guns and using them to point as they order around the crew. Their faces are draped in clothing and bandanas.

time-read
4 mins  |
December - January2021
Casualties
Professional Mariner

Casualties

NTSB: Dredge hit Texas gas pipeline, causing fire that killed four

time-read
4 mins  |
December - January2021
IMO emissions report raises new concerns about methane slip
Professional Mariner

IMO emissions report raises new concerns about methane slip

A recent report from the International Maritime Organization (IMO) reveals that global shipping emissions increased nearly 10 percent from 2012 to 2018, with the industry facing a growing challenge concerning methane slip.

time-read
3 mins  |
December - January2021
Bay State brothers find industry niche by making old into new
Professional Mariner

Bay State brothers find industry niche by making old into new

Zero non-conformities is what you want to hear when the U.S. Coast Guard inspects your tugboat. Once you’ve prepared your vessel, the inspectors come aboard to peruse your paperwork. They ask you pointed questions, to which they expect straightforward answers. Perusal completed, they then scrutinize all of the related safety systems, from bilge to antennas — even the ship’s bell.

time-read
5 mins  |
December - January2021
Signals
Professional Mariner

Signals

A year into the pandemic, thousands ‘essentially indentured’ on ships

time-read
3 mins  |
December - January2021
Analysis points to faulty loading, low ballast in Golden Ray rollover
Professional Mariner

Analysis points to faulty loading, low ballast in Golden Ray rollover

While the salvage of the sunken vehicle carrier Golden Ray has been delayed for months due to COVID-19 and the hurricane season, analysis by the U.S. Coast Guard has determined a possible cause for the rollover: a combination of vehicles placed too high on the ship’s decks, and not enough ballast water gave the placement of the cargo.

time-read
2 mins  |
December - January2021
Seastreak newcomer pushing through dip in demand
Professional Mariner

Seastreak newcomer pushing through dip in demand

Two years ago, Seastreak LLC took delivery of Seastreak Commodore, a 600-passenger fast ferry, from Gulf Craft of Franklin, La. Designed by Australia-based Incat Crowther, the vessel is the largest of its kind in the United States and was built to meet the burgeoning demand for service in the New York-New Jersey market.

time-read
2 mins  |
December - January2021
New year in a new world: Navigating COVID's maritime realities
Professional Mariner

New year in a new world: Navigating COVID's maritime realities

In a matter of days, the decorative time balls will drop, “Auld Lang Syne” will fill the air, and ships at anchor will sound their horns as the world welcomes in the new year.

time-read
4 mins  |
December - January2021
Advanced props, rudders provide new efficiencies below the waterline
Professional Mariner

Advanced props, rudders provide new efficiencies below the waterline

It took a decade or two from the invention of the marine propeller in the 19th century for the technology to become widely accepted. Thereafter, adoption has been nearly universal, but progress toward improved efficiencies has come in fits and starts.

time-read
5 mins  |
December - January2021