Four crew members died and at least six others were injured when the dredge Waymon L. Boyd became engulfed in fire while working in the Corpus Christi Ship Channel.
State and federal agencies are still investigating the incident, but the National Transportation Safety Board (NTSB) believes the 152-foot cutter head suction dredge struck a submerged gas pipeline. The impact ignited a massive inferno visible throughout the port.
“A geyser of gas and water erupted adjacent to the vessel,” the NTSB said in preliminary findings released in late September. “Shortly thereafter, the gas plume ignited and fire consumed the vessel and surrounding shoreline.”
There were 18 people working on the dredge on Aug. 21 when it reportedly struck the pipeline at about 0805. Two deceased crewmembers were found separately the morning after the incident; two others were found inside the sunken dredge on Aug. 24. The four victims have not been publicly identified. Six surviving crewmembers suffered serious burns that required treatment at a San Antonio burn center.
The NTSB and other authorities have not released a cause for the incident, nor have they explained how the dredge made contact with the pipeline. A spokesman for vessel operator Orion Marine said the company’s practice is to identify and mark pipelines located near active dredge sites before a project begins.
この記事は Professional Mariner の December - January2021 版に掲載されています。
7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。
すでに購読者です ? サインイン
この記事は Professional Mariner の December - January2021 版に掲載されています。
7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。
すでに購読者です? サインイン
Mariner's role still unknown as autonomous shipping gains speed
Mariners’ role still unknown as autonomous shipping gains speed
Piracy edges closer to home with wave of raids in southern Gulf
In the brief cellphone video recorded by a crewmember on the offshore supply vessel (OSV) Remas, the pirates walk back and forth on the deck of the ship, clenching their guns and using them to point as they order around the crew. Their faces are draped in clothing and bandanas.
Casualties
NTSB: Dredge hit Texas gas pipeline, causing fire that killed four
IMO emissions report raises new concerns about methane slip
A recent report from the International Maritime Organization (IMO) reveals that global shipping emissions increased nearly 10 percent from 2012 to 2018, with the industry facing a growing challenge concerning methane slip.
Bay State brothers find industry niche by making old into new
Zero non-conformities is what you want to hear when the U.S. Coast Guard inspects your tugboat. Once you’ve prepared your vessel, the inspectors come aboard to peruse your paperwork. They ask you pointed questions, to which they expect straightforward answers. Perusal completed, they then scrutinize all of the related safety systems, from bilge to antennas — even the ship’s bell.
Signals
A year into the pandemic, thousands ‘essentially indentured’ on ships
Analysis points to faulty loading, low ballast in Golden Ray rollover
While the salvage of the sunken vehicle carrier Golden Ray has been delayed for months due to COVID-19 and the hurricane season, analysis by the U.S. Coast Guard has determined a possible cause for the rollover: a combination of vehicles placed too high on the ship’s decks, and not enough ballast water gave the placement of the cargo.
Seastreak newcomer pushing through dip in demand
Two years ago, Seastreak LLC took delivery of Seastreak Commodore, a 600-passenger fast ferry, from Gulf Craft of Franklin, La. Designed by Australia-based Incat Crowther, the vessel is the largest of its kind in the United States and was built to meet the burgeoning demand for service in the New York-New Jersey market.
New year in a new world: Navigating COVID's maritime realities
In a matter of days, the decorative time balls will drop, “Auld Lang Syne” will fill the air, and ships at anchor will sound their horns as the world welcomes in the new year.
Advanced props, rudders provide new efficiencies below the waterline
It took a decade or two from the invention of the marine propeller in the 19th century for the technology to become widely accepted. Thereafter, adoption has been nearly universal, but progress toward improved efficiencies has come in fits and starts.
